Atlas TC289DAA Tire Changer
The Atlas TC289 DAA wheel clamp tire changer is the Atlas 289 wheel clamp tire changer that has been equipped with the pneumatic Atlas LH assist arm plus the Atlas RF assist arm that includes a bead roller and second bead lifting/pressing disc. The addition of the Dual Arm Assembly (DAA) to the Atlas 289 makes the Atlas 289DAA one of the most powerful wheel clamp tire changers in the marketplace.
The Atlas TC289DAA is the perfect wheel clamp tire changer for most general automotive service departments and medium to large sized tire stores. The Atlas 289DAA wheel clamp tire changer is capable of changing the majority of the expensive alloy and custom wheels found on today's vehicles.
The powerful adjustable bead breaker located on the side of the tire changer is designed to break even the most stubborn and rusted beads without damage to the rim. The bead breaker can be adjusted out to over 18 inches from the tire changer.
The turntable jaws (which can be covered with the standard protective plastic inserts) hold the rim securely without damaging the surface of the rim.
The Atlas TC 289DAA comes standard with a powerful bead blaster and inflator hose with gauge.
Atlas WB11 Wheel Balancer
The Atlas WB-11 is the most popular Atlas wheel balancer that we sell. Low price, dependability and repeatable accuracy make the Atlas WB-11 one of the most popular models of the entire Atlas line of computer wheel balancers. The Atlas WB-11 is very a simple, yet sophisticated wheel balancer. Each electrical component part is virtually "plug and play" so repair is easy when it is time to replace parts.
The Atlas WB-11 is capable of self-diagnosing problems and displays error codes so the operator can make the necessary adjustments or repairs in his own shop. There is no need to wait for the high priced service technician to visit your store. The simplicity of the Atlas WB-11, both in ease of use and ease of repair, make this balancer the perfect choice for your shop. The Atlas WB-11 wheel balancer handles wheels that weigh up to 130 LB.
Highlights
- Tire Inflator
- Adjustable Bead Breaker
- 3 Positions For Clamping Jaws
- 90-110 Psi
- Bead blaster
- 110v
- Left & Right Side Assist Arms
- Inner Clamp: 14” - 30”
- Outer Clamp: 12”- 28”
- Max Tire Diameter: 40”
- Max Wheel Width: 18.5”
Rims Steel, Aluminum, Alloy
External Clamping Range Position 1) 11 7/8" - 26"
Position 2) 12 7/8" - 27"
Position 3) 13 3/4" - 28"
Internal Clamping Range Position 1) 13 7/8" - 27 7/8"
Position 2) 14 5/8" - 28 7/8"
Position 3) 15 5/8" - 29 7/8"
External Locking Rim Dimension
(With Flip Adapters In The ATV Configuration) Position 1) 5" - 19 1/8"
Position 2) 5 7/8" - 20 1/8"
Position 3) 6 7/8" - 21 1/8"
External Locking Rim Dimension
(With Flip Adapters In The Motorcycle Configuration) Position 1) 15" - 29 1/8"
Position 2) 15 7/8" - 30"
Position 3) 16 7/8" - 31"
Bead Blaster Yes
Maximum tire diameter 40"
Operating voltage 110V 1Ph
Maximum wheel width (Bead Breaker) Position 1) 14 ¾"
Position 2) 18 ½
Air pressure 90 - 110 psi
Maximum Inlet Pressure not to exceed 170 PSI*
Shipping weight 3 Crates: 618 LBS., 154 LBS., & 169 LBS.
Turntable Rotating Torque 885 ft/lbs.
Wheel clamping 4 jaws: internal/external
Bead breaker Pneumatic, 5,500 LB. force
Oiler, filter, regulator Included
Soap reservoir Included
Warranty N/A
4 Black plastic rim protectors Included
Highlights
- Automatic positioning where to apply weights.
- Automatic and pedal operated brake.
- Automatic start/stop when hood is lowered/raised.
- Static and dynamic balancing modes.
- Rapid optimization (OPT)
- Self-diagnosis
- Self-calibration
- Exceptional stability in reading the unbalance between planes.
- Display in grams or ounces, in mm or inches.
- No anchor-down installation needed.
Max Tire Diameter 39"
Rim Sizes (cars and light trucks) 10"-32"
Rim Width 1 ½"-20"
Shaft Size 40mm
Max. Wheel Weight 150 LBS.
Balancing Speed 150 R.P.M
Automatic Data Entry NO
Truck Adapter Set Optional
Warranty N/A
Shipping Weight 355 LBS.
Power Supply 110V 1Ph
Motor ¼ HP
Display Standard or Metric
EXTRA’S INCLUDE: Stick on weights, Hammer on weights and balance beads. (Valued at $700.00-$900.00). Tire repair patches, Plugs, Cleaners, Glues, Secure finish and Bead sealers. (Valued at $400.00-$600.00). Quad/Motorcycle tire attachments. (Valued at $500.00). Bead press tool. (Valued at $200.00). Quick change head assembly. (Valued at $350.00). Three extra plastic heads. (Valued at $130.00 each). Tool box to store all weights and accessories. (Valued at $400.00).
Asking $7500.00 OBO. For more information contact Chris @ 780-545-0244.
