Had sold my air compressor a few years back and still have this Venturi left.
Good shape, no dents, no cracks

Fuel tank stand and tank for sale. $350 for all of it. CALLS AND TEXTS ONLY 780-933-2988

With stand,hose,nozzle,and filter.

2002 Wabash Al406 Crude Spec Tank
16.7 cubic Meter
Was used to haul salt water
Come with 3 inch Bowie pump and plumbing
Currently mounted on truck.

Electric Cement mixer in great condition! Hardly used!

Model 520-8 ( Only 180 Hrs )
44" Snow Blower
36" Roto Tiller
Wheel Weights & Chains

Was originally an on site rig ,out house with 220 volt insinerator toilet ,Heavy gauge steel . Guessing weighs 2500 to 3000 lbs?On a skid platform,7 ft high ,4 ft wide,5 ft deep 31 in wide door. Would make a good baking oven for powder coating ? Or smokehouse ? Whatever you need it to be.

8in I beam 3 runner skid
23ft x 7ft6in

1 brand new garage parking sensor; paid $35. Makes sure you park so that you have room around your vehicle. Never used, still in original packaging.
Text for more information.

Wrist a twist bucket for a 270 Hitachi in good shape don't use it asking 4500 obo

I have cement auger bucket asking 1850 Side discharge bucket asking 3850or best offer tire chains for skid steer two sets asking 500 obo steel tracks for skid steer asking 1900 obo

1965 Cessna 185D with only 4039.2 TTAF
TTSM 450 Aprox. Well maintained with Federal Airglide Hydraulic wheels skis and
Edo 3430 floats New starter, acorn exhaust
Seats recovered,155 Bendix radio and new
Garmin 340, Garmin 327,Fuel flow 450, EGT/CHT. New bladders New Selkirk interior panels. Great flying bush plane on floats or wheel skis. Very well maintained. Ready to go on 3430 floats or skis. $118000 firm.

4 3" Diameter Grundfos SQE pumps comes with 300' Lead Wire
Mounted on Hannay Reel

Grundfos Redi-Flo environmental sampling submersible pump
1 7/8" diameter various lead wire length. Mounted on Hannay reels
complete with variable frequency drive controller.

2005 CASE MXU 135 Tractor. 5409 Hrs. Comes with a LX 156 Loader bucket with grapple and a 12ft Deglman Blade. Call Wilf at 780-404-3303

2006 Case 580 SuperM Backhoe. 5494 hours. 2 Buckets. One is 16 inch and the other is 36 inch. Call Wilf for more info at 780-404-3303.

2004 Sterling Dump Truck. 504,570 kms. Inspection good till Jan 31, 2019. Call Wilf for more info at 780-404-3303

Approximately 1967 - 1850 Cockshutt Tractor with 10 foot blade. 105 horsepower. PTO. Works good. 2 pictures

8" hydraulic self feeder, 540 PTO driven three point hitch wood chipper. The two feed rollers can be set to any speed you want, depending on size of chips you want or how fast you want to work.
Machine only have a couple hours on it. Brought it in the shop, recheck knives and retorque.
So the two rotor knives and bed shear are in excellent shape. We can demo if need be.
This unit comes with a small chain saw, axe, and branch limber. Minimum of 20HP tractor is required. We had a 32 HP tractor on it and have a look what it does to a
3 1/2 willow tree, pretty nice chips.
Pending on a warm demo day.
3200.00 with out chain saw, axe, limber.

I am selling a Massey 811 skid steer. Not many of these around. It was sold as an underground mining machine for in the coal mines. It has foot controls. Just serviced the hydraulics last fall. It runs good with a Perkins 4 cylinder engine. The tires are in really good shape. I have an open canopy with mesh sides that I never put on it since I owned itt becsuse I used it to haul coal into my shed and it is very low without the canopy on it. I used this machine mostly for snow removal. Worked great but I now have a case 1845. I also have what looks like a homemade tooth bucket for it. One loader arm is cracked. I tried to straighten it and it cracked. I still used it for a year like this. It is an old machine and would be a great machine to restore. That was my plan but now I bought the case. I also have a lead on a 711 for parts. I can send pictures on request if interested. Call or text only @ 780-573-2041. Thanks. Ron. UPDATE: So I changed engine oil and filter last weekend. I noticed that it needs motor mounts now. I am lowering my price to 6500.00. This price is firm. It does need some work but it’s a skid steer that is useable as is.

28 foot with flip up beaver tails, up graded to 14 ply tires, 7000 lb axles, spare tire, 12000 lb warn winch, 35 foot wire remote,
Chain and boomer box up top, 2 5/16 ball mount telescoping hitch, oiled fur decking.
All in good shape, ready for work.
Have hauled bales, farm equipment and automobiles
8000.00 with out the winch.

Glendon Motorsports Ag & Equipment now sell skidsteer attachments, compact excavator attachments, along with wood processors/splitters, shredders, grinders, mulchers, tree spades, and almost anything else you can imagine. We have multiple suppliers, to ensure we can offer an attachment for whatever your budget might be.
Some of our suppliers include, but not limited to, are HLA Attachments, HLA Snow, EDGE Attachments, Erskine, Maratach, Baumalight, Wallenstein, and so much more!
If you are shopping around for an attachment or other various equipment, give our parts and service department a call today!

Paid 120, new in box 220v construction type heater.

Looking for a rock bucket for a bobcat. Text with price and pictures.
Thanks